GASOLINE ENGINE OIL

OPTIMUS 20W-50
Optimus 20W-50 is a lubricant for gasoline engines blended from high quality
base oils formulated with additives such as detergent, dispersant, and anti-
oxidant that help to protect pistons, prevent dirt buildup, and ensure low wear
rates in moving engine parts, especially valves.
[DOWNLOAD TDS]

OPTIMUS SUPER 20W-50
Optimus Super 20W-50 is an automotive engine lubricant produced from high
quality raw material and that has multigrade viscosity facilitating lubricant
circulation and providing optimum protection against component wear at high
and low temperatures.

The reliability of Optimus Super 20W-50 lays in its extremely stable high and
low temperature viscosity. This provides effective protective for pistons against
build up of deposits, protecting the engines from wear. It also contains anti-
oxidants to ensure stable oxidation.
[DOWNLOAD TDS]

OPTIMUS SUPER PLUS 15W-40
Optimus Super Plus 15W-40 is a lubricating oil for gasoline engines.
Formulated with selected high quality HVI virgin oils blended with a balance of
high tech additives including detergent, dispersant, anti-oxidant, anti wear and
VII (Viscosity Index Improver) agents, which all work together to provide
maximum protection for the lubricated engine parts, prolonging vehicle life.

Optimus Super Plus 15W-40 has the advantage of being in dual viscosity
state (multigrade) providing reliability at both high and low temperatures. The
lubricant ensures easy starts in low temperature conditions while retaining
adequate viscosity needed for lubrication at high temperatures and speeds.
[DOWNLOAD TDS]

OPTIMUS SUPER EXTRA 10W-40
Optimus Super Extra 10W-40 is a synthetic technology gasoline engine oil
designed to lubricate cards of the latest model even when they are operating
under the severest conditions. It is formulated from oil with detergent-dispersant,
anti-rust, oxidation inhibitors, high viscosity index, and low foaming tendency.
[DOWNLOAD TDS]

DIESEL ENGINE OIL

CRUISER
Cruiser is high performance lubricant designed to stay ahead of the latest developments in diesel engine technology that require overall protection especially against wear and corrosion, engine cleanliness and reduced fuel consumption with special base neutralizer additives to neutralize the acids that are formed within the engine. Cruiser is a multigrade lubricant providing perfect lubrication for both high and low temperature operation. Cruiser is available in two variants, Cruiser 15W-40 and Cruiser 20W-50.
[DOWNLOAD TDS]

CRUISER ADVANCE PLUS
Cruiser Advance Plus is a high quality new generation lubricant for diesel engines. It is formulated to meet the demands of the latest development in diesel engine technology. Cruiser Advance Plus is also a multigrade lubricant formulated with VII (Viscosity Index Improver) agents, which makes it extremely stable and gives an excellent viscosity consistency. It provides optimum lubrication at both high and low temperatures.

Cruiser Advance Plus provides effective protection against deposit build up, wear, corrosion, foaming on pistons during high temperature operation. It also possesses excellent oxidation stability and soot control. Cruiser Advance Plus is available in two variants, Cruiser Advance Plus 15W-40 and Cruiser Advance Plus 20W-50.
[DOWNLOAD TDS]

CRUISER HDA
Cruiser HDA is a high quality heavy duty lubricant for use in turbocharged diesel engines. The lubricant is specially formulated for high speed diesel engines commonly used in heavy equipment, transportation fleets and stationery machinery requiring a MIL-L-2104D standard lubricant.

There are three variants for Cruiser HDA, Cruiser HDA 10W, Cruiser HDA 30, and Cruiser HDA 40.
[DOWNLOAD TDS]

UNITRANS HD
Unitrans HD is a high quality heavy duty lubricant for use in off-highway equipment. It is specially formulated for common use in heavy equipment. Available variants: Unitrans HD 10W, Unitrans HD 30, Unitrans HD 50.
[DOWNLOAD TDS]

UNITRANS UTTO
Unitrans UTTO is a high quality heavy duty lubricant for use of most agricultural tractors and off-road equipments such as public work or handling equipments.
[DOWNLOAD TDS]

TRANSMISSION OIL

GOTRA
Gotra is a high performance gear lubricant appropriately formulated with high quality raw materials and selected high quality additives processed to a carefully balanced formula to ensure consistent high quality. Available in two variants: Gotra 90 and Gotra 140.
[DOWNLOAD TDS]

GOTRA TM
Gotra TM is a high performance heavy duty gear oil, formulated with high quality raw material and selected additives such as the high quality sulfur-phosphorus extra pressure additive anglamol ensuring maximum lubrication. Gotra TM is available in two variants, Gotra TM 80W-90 and Gotra TM 140.
[DOWNLOAD TDS]

GOTRA DEX-III
Gotra DEX-III is a high quality automatic transmission fluid that fits the latest General Motor Dexron III and Ford Mercon specifications.
[DOWNLOAD TDS]

HYDRAULIC OIL

LORENT Z
Lorent Z is formulated from highly refined paraffinic oil, fortified with antifoam and anti-wear additives as well as rust and oxidation inhibitors. This series of oils have been developed to provide antiwear characteristic, oxidation stability, and hydrolytic breakdown as well as low foaming tendency. Available in four variants: Lorent Z 32, Lorent Z 46, Lorent Z 68, Lorent Z 100.
[DOWNLOAD TDS]

LORENT X
Lorent X is a series of hydraulic oils which contain additives such as pourpoint depressants and anti-foam agents to provide protection against wear and prevent foaming. Lorent X is designed for the use of hydraulic equipments without silver-plated components. Available in three variants: Lorent X 46, Lorent X 68, Lorent X 100.
[DOWNLOAD TDS]

LORENT HVI
Lorent HVI is made of high quality mineral base oil group II, specially developed for uses in hydraulic systems. Lorent HVI is formulated with anti-foam, anti-oxidant, anti-wear, rust inhibitor, pour point depressant, viscosity index improver, and extreme pressure. Available in three variants: Lorent HVI 46, Lorent HVI 68, Lorent HVI 100.
[DOWNLOAD TDS]

LORENT ZNF
Lorent ZNF is an ashless antiwear hydraulic with high quality mineral base oil group II specially developed for use in hydraulic systems that require fluids which posses an extremely high viscosity index and a very low pour point for correct operation (ISO-L-HV classification). Lorent ZNF is formulated with viscosity index improver, pour point depressant, extreme pressure, anti-foam, anti-oxidant, anti-wear and rust inhibitor. Available in two variants: Lorent ZNF 46, Lorent ZNF 68.
[DOWNLOAD TDS]

CIRCULATING OIL

CIRCO
Circo is formulated with ingredients selected paraffin base and contains Rust and Oxidation (R&O) inhibitors in addition to anti-foam and air-release agent. Available in four variants: Circo 100, Circo 150, Circo 220, Circo 680.
[DOWNLOAD TDS]

CIRCO C 100
Circo C 100 is formulated with premium quality base oils and several high quality additives that support the operations of circulation systems and some industrial applications that do not require lubricants with EP properties.
[DOWNLOAD TDS]

CIRCO RO 220
Circo RO 220 is formulated with high quality paraffinic base oil, anti-rust additives, oxidation inhibitors and low foaming tendency for lubrication of moving parts operating under severe temperature conditions (R & O classifications).
[DOWNLOAD TDS]

COMPRESSOR OIL

AMON SH
Amon SH was developed to meet the increased requirements of compressor manufacturers on the service life of compressor oils. Due to the function of compressors, intensive swirling of the cooling oil and air occurs. At high compression temperatures, the oils are subjected to a strong oxidative attack that accelerates ageing. The selection of special mineral base oils and additive systems in Amon SH makes long, interruption free operation possible. To ensure optimum performance of the oil separator, the air release properties and low foaming are characteristic for screw compressor oils. Available in four variants: Amon SH 32, Amon SH 46, Amon SH 68, Amon SH 100.
[DOWNLOAD TDS]

AMON SHC
Amon SHC has been specially formulated from synthetic polyalphaolefine base oil and additive
technology for lubrication rotary & screw air compressors. Amon SHC combines the high temperature oxidation inhibitors, providing excellent oxidation stability, rust and corrosion inhibitors. Features and benefits of nature Amon SHC will contribute to reduce the cost of maintenance as their property will extend the life of the oil through the reduction of deposit formation and oxidation. Available in four variants: Amon SHC 32, Amon SHC 46, Amon SH 68, Amon SHC 100.
[DOWNLOAD TDS]

TURBINE OIL

TURNO
Turno are high quality lubricants formulated to support the operation of both steam and gas turbines ensuring consistently high performance.

Turno are developed to provide a solution to problems frequently faced when turbines are operated discontinuously and in a high temperature operation environments. The lubricants are formulated using selected virgin base oils and high quality additives to provide maximum protection during long periods of operation.

The primary strengths of the product are high temperature oxidation resistance, rust inhibition, anti foaming properties, water separability ensuring protection for crucial components. The correct choice of optimum viscosity and high flow rate allow maximum heat transfer in bearings while maintaining.

Turno is available in three variants, Turno 32, Turno 46, and Turno 68.
[DOWNLOAD TDS]

HEAT TRANSFER OIL

HITERM 300
Hiterm 300 is formulated with selected base oil. It has a good oxidation stability for various viscosity requirement and operating temperatures condition.
[DOWNLOAD TDS]

INDUSTRIAL GEAR OIL

IGO
IGO is series of high quality lead-free extra-pressure lubricants for the use of all types of closed system industrial gears ranging from normal to heavy-duty applications. The lubricants are formulated from base oils with a high viscosity index with an optimum balance of additives to provide good protection against corrosion and wear, provide high oxidation resistance, and prevent the formation of foam. Available in seven variants: IGO 68, IGO 100, IGO 150, IGO 220, IGO 320, IGO 460, and IGO 680.
[DOWNLOAD TDS]

MEDVAC
Medvac is a high quality lead-free extra-pressure lubricants for all types of closed system industrial gears ranging from normal to heavy duty applications. Medvac is formulated from fully-synthetic base oil with a high viscosity index with an optimum balance of special additives to provide good protection against corrosion and wear, high oxidation resistance, and foam formation prevention. Medvac is fortified with additives that can cope with high ambient level of its Calcium carbonate. Available in four variants: Medvac 220, Medvac 320, Medvac 460, and Medvac 680.
[DOWNLOAD TDS]

PMO
PMO is a high quality lead-free extra-pressure lubricants for use with all types of closed system industrial gears ranging from normal to heavy-duty applications.

PMO is formulated with paraffinic base oils with a high viscosity index and optimally balanced special additives to provide high oxidation resistance, good protection against corrosion and wear, and prevent the formation of foam. Available in three variants: PMO 100, PMO 150, and PMO 220.
[DOWNLOAD TDS]

PMO SYN
PMO SYN 220 is formulated with fullysynthetic PAO base oils with a high viscosity index with an optimum balance of special additives to provide high oxidation resistance, good protection against corrosion and wear, and prevent the formation of foam.

PMO SYN 220 is a high quality lead-free extra-pressure lubricant for use with all types of closed system industrial gears ranging from normal to heavy-duty applications.
[DOWNLOAD TDS]

MARINE OIL

NEPTUN C
Neptun C is a cylinder oil which is formulated with a high quality base stock for low speed two stroke crosshead diesel engine. Available in two variants: Neptun C 550 and Neptun C 570.
[DOWNLOAD TDS]

NEPTUN S
Neptun S is designed for crankcase lubrication of larger low speed two stroke crosshead diesel engine.
[DOWNLOAD TDS]

NEPTUN TP
Neptun TP is a premium quality diesel engine lubricant formulated to meet the special needs of low speed marine and industrial trunk piston diesel engines that use fuels with high sulfur content in excess of 2.5%-3.5%wt. Available in four variants: Neptun TP 330, Neptun TP 415, Neptun TP 430, and Neptun TP 440.
[DOWNLOAD TDS]

METALWORKING OIL

GOSLIDE
Goslide is a combination of highly refined petroleum lube oils group II, extreme pressure and oiliness additives. It is designed to give the ultimate in lubrication of the table and be ways of the machine, and for the type of equipment requiring tacky non-corrosive and non-drip lubricant with extreme pressure properties.
[DOWNLOAD TDS]

HYDROCUT 32
Hydrocut 32 is formulated from highly refined paraffinic oil with anti-rust additives, oxidation inhibitors, and low foaming tendency.
[DOWNLOAD TDS]

ROLLA RL 150
Rolla RL 150 is a high quality paraffinic base oil with anti-rust additives, oxidation inhibitors, and low foaming tendency. The product is also formulated with antioxidant and antirust additives.
[DOWNLOAD TDS]

SOLCUT
Solcut is a lubricant which made of refined base oil and designed as multipurpose oil for cutting operations. It contains additives to improve oxidation stability and corrosion protection, along with EP additives to improve load bearing capacity and reduce wear between tool and workpiece and act as a good emulsifier. SOLCUT is formulated to be a low misting and low evaporating lubricant, which contributes towards reducing environmental and workshop pollution.
[DOWNLOAD TDS]

KANET
Kanet is a high performance cutting oil, designed for severe operations such as broaching, deep whole drilling, and gear cutting. It has excellent extreme pressure properties, giving superior surface finish and longer tool life. It does not stain difficult metals such as bronzes, brasses, and gives good chip removal.
[DOWNLOAD TDS]

CLEAN88
Clean88 is a very low sulphur content, non-detergent industrial Group II flushing oil that is suitable for the flushing removal of light hydrocarbon based industrial fluid systems.
[DOWNLOAD TDS]

WHITE OIL

WHITE OIL FG
White Oil FG is made of Hydrotreated Light Paraffinic processed base oil, finished after advanced chemical dewaxing and refining process. White Oil FG is colorless, odorless, no fluorescence, and is a clean transparent liquid with good rust proofing, good cooling, good cleaning, and good lubricative property. It is widely used in cosmetics and personal care processing products. There are two variants of White Oil FG, White Oil FG 15 and White Oil FG 68.
[DOWNLOAD TDS]